本型電壓互感器為環氧樹脂真空澆注全封閉單棺戶內結構 , 主要適用于額定頻率為50Hz , 額定電壓10kV及以下電力系統中作電能計量,電壓測量用。
本產品符合GB 20840.1-2010 《互感器第1部分:通用技術要求》、 GB 20840.3-2013《互感器第3部分:電壓互感器的補充技術要求》和JJG314-2010《測量用電壓互感器檢定規程》。
This type of voltage transformer adopts epoxy-resin vacuum casting and fully closed single-phase structure for indoor use, is applicable for power systems of rated frequency 50Hz and rated voltage up to and including 10kV, used for electric energy metering and voltage measurement.
It complies with the standards GB 20840.1-2010 Instrument transformers-Part 1: General requiremen怡, GB 20840.3-2013 Instrument transformers-Part 3:Additional requirements for inductive voltage transformers, and JJG 314-2010 Instrument Voltage Transformers.
1、海拔:不超過1000米;
2、環境溫度:-5℃~+40℃;
3、空氣相對濕度:≤85%;
4、安裝場所:戶內。
1.Altitude should not exceed 1000m;
2.Ambient temperature: -5℃~+40℃;
3.Air relative humidity:≤85%;
4. Installation site: indoor。
1、絕緣水平: 12/42/75kV,7.2/30/60 ;
2、功率因數:cosφ=0.8;
3、額定二次電流:5A或1A;
4、額定頻率:50Hz或者60Hz;
5、重量:30kg。
1. Insulation level: 12/42/75kV,7.2/30/60 ;
2. Power factor: cosφ=0.8;
3.Rated secondary current: 5A or 1A,;
4.Rated frequency: 50Hz or 60Hz;
5.Weight: 30kg.